SlyX; The SlyX protein has no known function. It is short less than 80 amino acids and is ...
29-62
1.34e-04
SlyX; The SlyX protein has no known function. It is short less than 80 amino acids and is found close to the slyD gene. The SlyX protein has a conserved PPH(Y/W) motif at its C-terminus. The protein may be a coiled-coil structure.
The actual alignment was detected with superfamily member pfam04102:
Pssm-ID: 461173 [Multi-domain] Cd Length: 66 Bit Score: 39.78 E-value: 1.34e-04
Phosphate-selective porin O and P; This family represents a conserved region approximately 400 ...
108-487
1.33e-39
Phosphate-selective porin O and P; This family represents a conserved region approximately 400 residues long within the bacterial phosphate-selective porins O and P. These are anion-specific porins, the binding site of which has a higher affinity for phosphate than chloride ions. Porin O has a higher affinity for polyphosphates, while porin P has a higher affinity for orthophosphate. In P. aeruginosa, porin O was found to be expressed only under phosphate-starvation conditions during the stationary growth phase.
Pssm-ID: 429442 Cd Length: 371 Bit Score: 146.83 E-value: 1.33e-39
SlyX; The SlyX protein has no known function. It is short less than 80 amino acids and is ...
29-62
1.34e-04
SlyX; The SlyX protein has no known function. It is short less than 80 amino acids and is found close to the slyD gene. The SlyX protein has a conserved PPH(Y/W) motif at its C-terminus. The protein may be a coiled-coil structure.
Pssm-ID: 461173 [Multi-domain] Cd Length: 66 Bit Score: 39.78 E-value: 1.34e-04
Coiled-coiled domain of autophagy-related 16 (Atg16) family proteins; The Atg16 family ...
28-79
1.32e-03
Coiled-coiled domain of autophagy-related 16 (Atg16) family proteins; The Atg16 family includes Saccharomyces cerevisiae Atg16 (also called cytoplasm to vacuole targeting protein 11, CVT11, or SAP18), human autophagy-related protein 16-1 (also called APG16-like 1, ATG16L1, or APG16L) and autophagy-related protein 16-2 (also called APG16-like 2, ATG16L2, WD repeat-containing protein 80 or WDR80), and similar proteins. Atg16 stabilizes the Atg5-Atg12 conjugate and mediates the formation of the 350 kDa complex, which is necessary for autophagy. The Atg5-Atg12/Atg16 complex is required for efficient promotion of Atg8-conjugation to phosphatidylethanolamine and Atg8 localization to the pre-autophagosomal structure (PAS). Similarly, human ATG16L1 plays an essential role in autophagy and acts as a molecular scaffold which mediates protein-protein interactions essential for autophagosome formation. ATG16L2, though structurally similar to ATG16L1 and able to form a complex with the autophagy proteins Atg5 and Atg12, is not essential for autophagy. Single-nucleotide polymorphisms in ATG16L1 is associated with an increased risk of developing Crohn disease. Saccharomyces cerevisiae Atg16 contains an N-terminal domain (NTD) that interacts with the Atg5-Atg12 protein conjugate and a coiled-coil domain (CCD) that dimerizes and mediates self-assembly. Human ATG16L1 and ATG16L2 also contains an N-terminal region that binds Atg5, a CCD homologous to the yeast CCD, and a WD40 domain that represents approximately 50% of the full-length protein. This model corresponds to the CCD of Atg16 family proteins.
Pssm-ID: 439196 [Multi-domain] Cd Length: 91 Bit Score: 37.93 E-value: 1.32e-03
Phosphate-selective porin O and P; This family represents a conserved region approximately 400 ...
108-487
1.33e-39
Phosphate-selective porin O and P; This family represents a conserved region approximately 400 residues long within the bacterial phosphate-selective porins O and P. These are anion-specific porins, the binding site of which has a higher affinity for phosphate than chloride ions. Porin O has a higher affinity for polyphosphates, while porin P has a higher affinity for orthophosphate. In P. aeruginosa, porin O was found to be expressed only under phosphate-starvation conditions during the stationary growth phase.
Pssm-ID: 429442 Cd Length: 371 Bit Score: 146.83 E-value: 1.33e-39
SlyX; The SlyX protein has no known function. It is short less than 80 amino acids and is ...
29-62
1.34e-04
SlyX; The SlyX protein has no known function. It is short less than 80 amino acids and is found close to the slyD gene. The SlyX protein has a conserved PPH(Y/W) motif at its C-terminus. The protein may be a coiled-coil structure.
Pssm-ID: 461173 [Multi-domain] Cd Length: 66 Bit Score: 39.78 E-value: 1.34e-04
Coiled-coiled domain of autophagy-related 16 (Atg16) family proteins; The Atg16 family ...
28-79
1.32e-03
Coiled-coiled domain of autophagy-related 16 (Atg16) family proteins; The Atg16 family includes Saccharomyces cerevisiae Atg16 (also called cytoplasm to vacuole targeting protein 11, CVT11, or SAP18), human autophagy-related protein 16-1 (also called APG16-like 1, ATG16L1, or APG16L) and autophagy-related protein 16-2 (also called APG16-like 2, ATG16L2, WD repeat-containing protein 80 or WDR80), and similar proteins. Atg16 stabilizes the Atg5-Atg12 conjugate and mediates the formation of the 350 kDa complex, which is necessary for autophagy. The Atg5-Atg12/Atg16 complex is required for efficient promotion of Atg8-conjugation to phosphatidylethanolamine and Atg8 localization to the pre-autophagosomal structure (PAS). Similarly, human ATG16L1 plays an essential role in autophagy and acts as a molecular scaffold which mediates protein-protein interactions essential for autophagosome formation. ATG16L2, though structurally similar to ATG16L1 and able to form a complex with the autophagy proteins Atg5 and Atg12, is not essential for autophagy. Single-nucleotide polymorphisms in ATG16L1 is associated with an increased risk of developing Crohn disease. Saccharomyces cerevisiae Atg16 contains an N-terminal domain (NTD) that interacts with the Atg5-Atg12 protein conjugate and a coiled-coil domain (CCD) that dimerizes and mediates self-assembly. Human ATG16L1 and ATG16L2 also contains an N-terminal region that binds Atg5, a CCD homologous to the yeast CCD, and a WD40 domain that represents approximately 50% of the full-length protein. This model corresponds to the CCD of Atg16 family proteins.
Pssm-ID: 439196 [Multi-domain] Cd Length: 91 Bit Score: 37.93 E-value: 1.32e-03
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
