Dentin matrix protein 1 (DMP1); This family consists of several mammalian dentin matrix ...
1-512
3.74e-144
Dentin matrix protein 1 (DMP1); This family consists of several mammalian dentin matrix protein 1 (DMP1) sequences. The dentin matrix acidic phosphoprotein 1 (DMP1) gene has been mapped to human chromosome 4q21. DMP1 is a bone and teeth specific protein initially identified from mineralized dentin. DMP1 is primarily localized in the nuclear compartment of undifferentiated osteoblasts. In the nucleus, DMP1 acts as a transcriptional component for activation of osteoblast-specific genes like osteocalcin. During the early phase of osteoblast maturation, Ca(2+) surges into the nucleus from the cytoplasm, triggering the phosphorylation of DMP1 by a nuclear isoform of casein kinase II. This phosphorylated DMP1 is then exported out into the extracellular matrix, where it regulates nucleation of hydroxyapatite. DMP1 is a unique molecule that initiates osteoblast differentiation by transcription in the nucleus and orchestrates mineralized matrix formation extracellularly, at later stages of osteoblast maturation. The DMP1 gene has been found to be ectopically expressed in lung cancer although the reason for this is unknown.
:
Pssm-ID: 462128 [Multi-domain] Cd Length: 519 Bit Score: 424.34 E-value: 3.74e-144
Dentin matrix protein 1 (DMP1); This family consists of several mammalian dentin matrix ...
1-512
3.74e-144
Dentin matrix protein 1 (DMP1); This family consists of several mammalian dentin matrix protein 1 (DMP1) sequences. The dentin matrix acidic phosphoprotein 1 (DMP1) gene has been mapped to human chromosome 4q21. DMP1 is a bone and teeth specific protein initially identified from mineralized dentin. DMP1 is primarily localized in the nuclear compartment of undifferentiated osteoblasts. In the nucleus, DMP1 acts as a transcriptional component for activation of osteoblast-specific genes like osteocalcin. During the early phase of osteoblast maturation, Ca(2+) surges into the nucleus from the cytoplasm, triggering the phosphorylation of DMP1 by a nuclear isoform of casein kinase II. This phosphorylated DMP1 is then exported out into the extracellular matrix, where it regulates nucleation of hydroxyapatite. DMP1 is a unique molecule that initiates osteoblast differentiation by transcription in the nucleus and orchestrates mineralized matrix formation extracellularly, at later stages of osteoblast maturation. The DMP1 gene has been found to be ectopically expressed in lung cancer although the reason for this is unknown.
Pssm-ID: 462128 [Multi-domain] Cd Length: 519 Bit Score: 424.34 E-value: 3.74e-144
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial ...
151-464
2.99e-04
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial Surface Components Recognizing Adhesive Matrix Molecules). It is heavily studied in Staphylococcus aureus both for its biological role in adhesion and for its potential for vaccination. Features of the sequence, but also of other MSCRAMM adhesins, include a long run of Ser-Asp dipeptide repeats and a C-terminal cell wall anchoring LPXTG motif.
Pssm-ID: 468110 [Multi-domain] Cd Length: 934 Bit Score: 43.74 E-value: 2.99e-04
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial ...
126-449
4.80e-04
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial Surface Components Recognizing Adhesive Matrix Molecules). It is heavily studied in Staphylococcus aureus both for its biological role in adhesion and for its potential for vaccination. Features of the sequence, but also of other MSCRAMM adhesins, include a long run of Ser-Asp dipeptide repeats and a C-terminal cell wall anchoring LPXTG motif.
Pssm-ID: 468110 [Multi-domain] Cd Length: 934 Bit Score: 42.97 E-value: 4.80e-04
Dentin matrix protein 1 (DMP1); This family consists of several mammalian dentin matrix ...
1-512
3.74e-144
Dentin matrix protein 1 (DMP1); This family consists of several mammalian dentin matrix protein 1 (DMP1) sequences. The dentin matrix acidic phosphoprotein 1 (DMP1) gene has been mapped to human chromosome 4q21. DMP1 is a bone and teeth specific protein initially identified from mineralized dentin. DMP1 is primarily localized in the nuclear compartment of undifferentiated osteoblasts. In the nucleus, DMP1 acts as a transcriptional component for activation of osteoblast-specific genes like osteocalcin. During the early phase of osteoblast maturation, Ca(2+) surges into the nucleus from the cytoplasm, triggering the phosphorylation of DMP1 by a nuclear isoform of casein kinase II. This phosphorylated DMP1 is then exported out into the extracellular matrix, where it regulates nucleation of hydroxyapatite. DMP1 is a unique molecule that initiates osteoblast differentiation by transcription in the nucleus and orchestrates mineralized matrix formation extracellularly, at later stages of osteoblast maturation. The DMP1 gene has been found to be ectopically expressed in lung cancer although the reason for this is unknown.
Pssm-ID: 462128 [Multi-domain] Cd Length: 519 Bit Score: 424.34 E-value: 3.74e-144
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial ...
151-464
2.99e-04
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial Surface Components Recognizing Adhesive Matrix Molecules). It is heavily studied in Staphylococcus aureus both for its biological role in adhesion and for its potential for vaccination. Features of the sequence, but also of other MSCRAMM adhesins, include a long run of Ser-Asp dipeptide repeats and a C-terminal cell wall anchoring LPXTG motif.
Pssm-ID: 468110 [Multi-domain] Cd Length: 934 Bit Score: 43.74 E-value: 2.99e-04
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial ...
126-449
4.80e-04
MSCRAMM family adhesin clumping factor ClfA; Clumping factor A is an MSCRAMM (Microbial Surface Components Recognizing Adhesive Matrix Molecules). It is heavily studied in Staphylococcus aureus both for its biological role in adhesion and for its potential for vaccination. Features of the sequence, but also of other MSCRAMM adhesins, include a long run of Ser-Asp dipeptide repeats and a C-terminal cell wall anchoring LPXTG motif.
Pssm-ID: 468110 [Multi-domain] Cd Length: 934 Bit Score: 42.97 E-value: 4.80e-04
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
