NupC/NupG family nucleoside CNT transporter similar to Homo sapiens sodium/nucleoside cotransporter 1 isoform 3 that selectively transports pyrimidine deoxyribonucleosides
nucleoside transporter; The Concentrative Nucleoside Transporter (CNT) Family (TC 2.A.41) ...
218-602
2.15e-137
nucleoside transporter; The Concentrative Nucleoside Transporter (CNT) Family (TC 2.A.41) Members of the CNT family mediate nucleoside uptake. In bacteria they are energized by H+ symport, but in mammals they are energized by Na+ symport. The different transporters exhibit differing specificities for nucleosides. The E. coli NupC permease transports all nucleosides (both ribo- and deoxyribonucleosides) except hypoxanthine and guanine nucleosides. The B. subtilis NupC is specific for pyrimidine nucleosides (cytidine and uridine and the corresponding deoxyribonucleosides). The mammalian permease members of the CNT family also exhibit differing specificities. Thus, rats possess at least two NupC homologues, one specific for both purine and pyrimidine nucleosides and one specific for purine nucleosides. At least three paralogues have been characterized from humans. One human homologue(CNT1) transports pyrimidine nucleosides and adenosine, but deoxyadenosine and guanosine are poor substrates of this permease. Another (CNT2) is selective for purine nucleosides. Alteration of just a few amino acyl residues in TMSs 7 and 8 interconverts their specificities. [Transport and binding proteins, Nucleosides, purines and pyrimidines]
The actual alignment was detected with superfamily member TIGR00804:
Pssm-ID: 273278 [Multi-domain] Cd Length: 401 Bit Score: 408.61 E-value: 2.15e-137
nucleoside transporter; The Concentrative Nucleoside Transporter (CNT) Family (TC 2.A.41) ...
218-602
2.15e-137
nucleoside transporter; The Concentrative Nucleoside Transporter (CNT) Family (TC 2.A.41) Members of the CNT family mediate nucleoside uptake. In bacteria they are energized by H+ symport, but in mammals they are energized by Na+ symport. The different transporters exhibit differing specificities for nucleosides. The E. coli NupC permease transports all nucleosides (both ribo- and deoxyribonucleosides) except hypoxanthine and guanine nucleosides. The B. subtilis NupC is specific for pyrimidine nucleosides (cytidine and uridine and the corresponding deoxyribonucleosides). The mammalian permease members of the CNT family also exhibit differing specificities. Thus, rats possess at least two NupC homologues, one specific for both purine and pyrimidine nucleosides and one specific for purine nucleosides. At least three paralogues have been characterized from humans. One human homologue(CNT1) transports pyrimidine nucleosides and adenosine, but deoxyadenosine and guanosine are poor substrates of this permease. Another (CNT2) is selective for purine nucleosides. Alteration of just a few amino acyl residues in TMSs 7 and 8 interconverts their specificities. [Transport and binding proteins, Nucleosides, purines and pyrimidines]
Pssm-ID: 273278 [Multi-domain] Cd Length: 401 Bit Score: 408.61 E-value: 2.15e-137
Na+ dependent nucleoside transporter C-terminus; This family consists of nucleoside transport ...
378-600
1.35e-107
Na+ dependent nucleoside transporter C-terminus; This family consists of nucleoside transport proteins. Swiss:Q62773 is a purine-specific Na+-nucleoside cotransporter localized to the bile canalicular membrane. Swiss:Q62674 is a a Na+-dependent nucleoside transporter selective for pyrimidine nucleosides and adenosine it also transports the anti-viral nucleoside analogues AZT and ddC. This alignment covers the C-terminus of this family of transporters.
Pssm-ID: 462223 Cd Length: 205 Bit Score: 324.35 E-value: 1.35e-107
nucleoside transporter; The Concentrative Nucleoside Transporter (CNT) Family (TC 2.A.41) ...
218-602
2.15e-137
nucleoside transporter; The Concentrative Nucleoside Transporter (CNT) Family (TC 2.A.41) Members of the CNT family mediate nucleoside uptake. In bacteria they are energized by H+ symport, but in mammals they are energized by Na+ symport. The different transporters exhibit differing specificities for nucleosides. The E. coli NupC permease transports all nucleosides (both ribo- and deoxyribonucleosides) except hypoxanthine and guanine nucleosides. The B. subtilis NupC is specific for pyrimidine nucleosides (cytidine and uridine and the corresponding deoxyribonucleosides). The mammalian permease members of the CNT family also exhibit differing specificities. Thus, rats possess at least two NupC homologues, one specific for both purine and pyrimidine nucleosides and one specific for purine nucleosides. At least three paralogues have been characterized from humans. One human homologue(CNT1) transports pyrimidine nucleosides and adenosine, but deoxyadenosine and guanosine are poor substrates of this permease. Another (CNT2) is selective for purine nucleosides. Alteration of just a few amino acyl residues in TMSs 7 and 8 interconverts their specificities. [Transport and binding proteins, Nucleosides, purines and pyrimidines]
Pssm-ID: 273278 [Multi-domain] Cd Length: 401 Bit Score: 408.61 E-value: 2.15e-137
Na+ dependent nucleoside transporter C-terminus; This family consists of nucleoside transport ...
378-600
1.35e-107
Na+ dependent nucleoside transporter C-terminus; This family consists of nucleoside transport proteins. Swiss:Q62773 is a purine-specific Na+-nucleoside cotransporter localized to the bile canalicular membrane. Swiss:Q62674 is a a Na+-dependent nucleoside transporter selective for pyrimidine nucleosides and adenosine it also transports the anti-viral nucleoside analogues AZT and ddC. This alignment covers the C-terminus of this family of transporters.
Pssm-ID: 462223 Cd Length: 205 Bit Score: 324.35 E-value: 1.35e-107
Na+ dependent nucleoside transporter N-terminus; This family consists of nucleoside transport ...
223-294
8.24e-15
Na+ dependent nucleoside transporter N-terminus; This family consists of nucleoside transport proteins. Swiss:Q62773 is a purine-specific Na+-nucleoside cotransporter localized to the bile canalicular membrane. Swiss:Q62674 is a a Na+-dependent nucleoside transporter selective for pyrimidine nucleosides and adenosine it also transports the anti-viral nucleoside analogues AZT and ddC. This alignment covers the N terminus of this family
Pssm-ID: 460319 [Multi-domain] Cd Length: 73 Bit Score: 69.71 E-value: 8.24e-15
Nucleoside recognition; This region in the nucleoside transporter proteins are responsible for ...
300-373
5.77e-06
Nucleoside recognition; This region in the nucleoside transporter proteins are responsible for determining nucleoside specificity in the human CNT1 and CNT2 proteins. In the FeoB proteins, which are believed to be Fe2+ transporters, it includes the membrane pore region, so the function of this region is likely to be more general than just nucleoside specificity. This family may represent the pore and gate, with a wide potential range of specificity. Hence its name 'Gate'.
Pssm-ID: 429586 [Multi-domain] Cd Length: 101 Bit Score: 45.32 E-value: 5.77e-06
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
