NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Sample GSM7099698 Query DataSets for GSM7099698
Status Public on Mar 16, 2023
Title 6933_input (biol rep 1 control)
Sample type SRA
 
Source name yeast cell
Organism Saccharomyces cerevisiae
Characteristics strain: 6933
cell type: yeast cell
chip antibody: none
genotype: MATa ura3-52 trp1-289 leu2-3,112 bar1::LEU2 rad55:TRP1-PGAL1-RAD55
Treatment protocol Cells at exponential phase were pre-grown in YP + raffinose to OD600=0.3 and synchronized with α-factor for 2.5 hours. Galactose was then added to the final concentration of 2% and cells were incubated at 30°C for another hour. After that, α-factor was washed away, cells were transferred to fresh YP + galactose media with nocodazole and incubated for 2 hours.
cells were crosslinked with 1.4% of formaldehyde at 30°C in a shaking water bath for 10 minutes. Crosslinking was stopped by adding glycine to the final concentration of 0.25 M and incubating the cultures for 5 minutes. 200 OD600 units were harvested for ChIP-seq for each sample.
Extracted molecule genomic DNA
Extraction protocol The 200 OD600 units harvested for each strain were split into four Eppendorf tubes (50 OD600 units in each) and resuspended in 400 µl of bead-beating buffer (50 mM HEPES-KOH pH 7.5, 150 mM NaCl, 1 mM EDTA, 1 mM PMSF, 1 cOmplete Mini, EDTA-free Protease Inhibitor Cocktail tablet (Roche, 11836170001) per 5 ml of buffer). An equal volume of glass beads (0.5 mm diameter, BioSpec Products) was added, and the tubes were vortexed for 25 cycles (3,000 rpm; 30 seconds of vortexing, 1 minute of resting on ice). After vortexing, cells were separated from the beads and cells and nuclei were lysed with 0.5% (w/v) SDS for 10 minutes on ice. Tubes were then centrifuged at 20,817 g for 15 minutes at 4°C, the resulting supernatants were removed, the pellets were washed with 1 ml of 0.1% SDS buffer (50 mM HEPES-KOH pH 7.5, 150 mM NaCl, 0.1% (w/v) SDS, 1% Triton X-100 (w/v), 0.1% Sodium Deoxycholate, 1 mM EDTA, 1 mM PMSF, 1 cOmplete Mini, EDTA-free Protease Inhibitor Cocktail tablet (Roche, 11836170001) per 5 ml of buffer) and resuspended in 300 µl of the same buffer. Cell extracts were then sonicated in Bioruptor Plus sonicator (Diagenode) for 20 cycles (30 seconds ON / 30 seconds OFF) on the HIGH power setting. After the sonication, cell debris was spun down at 20,817 g for 15 minutes at 4°C, and supernatants were transferred into fresh Eppendorf tubes containing 1 ml of the 0.1% SDS buffer. Samples belonging to the same strain (split into 4 Eppendorf tubes at the beginning) were then pooled together. 10 µl were collected as input aliquots for each sample, mixed with 390 µl of TE (10 mM Tris-HCl, pH 8, 1 mM EDTA) and stored at -80°C. Four immunoprecipitation reactions were set up for each sample by mixing 1 ml of sonicated cell lysate with 15 µl of Anti-Rad51 (y-180) rabbit polyclonal (Santa Cruz Biotechnology sc-33626) antibody and 15 µl of Dynabeads protein A magnetic beads (Invitrogen, 10002D). The mixtures were incubated overnight at 4°C on a rotating wheel. Next day, beads were recovered using a magnet and sequentially washed with wash buffer 1 (50 mM HEPES-KOH pH 7.5, 275 mM NaCl, 0.1% (w/v) SDS, 1% Triton X-100 (w/v), 0.1% Sodium Deoxycholate, 1 mM EDTA, 1 mM PMSF, 1 cOmplete Mini, EDTA-free Protease Inhibitor Cocktail tablet (Roche, 11836170001) per 5 ml of buffer), wash buffer 2 (50 mM HEPES-KOH pH 7.5, 500 mM NaCl, 0.1% (w/v) SDS, 1% Triton X-100 (w/v), 0.1% Sodium Deoxycholate, 1 mM EDTA, 1 mM PMSF, 1 cOmplete Mini, EDTA-free Protease Inhibitor Cocktail tablet (Roche, 11836170001) per 5 ml of buffer), wash buffer 3 (10 mM Tris-HCl, pH 8, 0.25 M LiCl, 1mM EDTA, 0.5% IGEPAL, 0.5% Sodium Deoxycholate) and wash buffer 4 (10 mM Tris-HCl, pH 8, 1 mM EDTA) for 5 minutes each wash on a rotating wheel at room temperature. To elute precipitated chromatin, beads belonging to the same sample were pooled together in 200 µl of TES (50 mM Tris-HCl, pH 7.5, 10 mM EDTA, 1% SDS) and then incubated at 65°C for 10 minutes with mixing. Tubes were then vortexed, incubated at 65°C for additional 10 minutes and the eluted chromatin was separated from the magnetic beads by centrifugation at 15,871 g for 3 minutes. The beads were washed with 200 µl of TE on the rotating wheel for 15 minutes at room temperature. The tubes were then centrifuged at 15,871 g for 3 minutes, and the resulting supernatants were mixed with the corresponding aliquots of the eluted chromatin. To remove proteins from the IPed DNA, Proteinase K was added to the immunoprecipitated chromatin samples to the final concentration of 1 mg/ml, and the tubes were incubated at 65°C overnight. Next day, immunoprecipitated DNA was purified using QIAquick® PCR Purification Kit (Qiagen, 28106) and eluted in 35 µl of water.
ChIP-seq libraries were prepared using DNA SMARTTM ChIP-Seq Kit (Takara Bio, 634865) according to the manufacturer’s instructions
12 samples were indexed as indicated in the sample description. Indexed samples were pooled and sequences together.
 
Library strategy ChIP-Seq
Library source genomic
Library selection ChIP
Instrument model Illumina MiniSeq
 
Description indexes used for this sample - R5 (TTCTGAAT) and F2 (ATAGAGGC)
mutant_7208_7208_control_6933_6934_ratio_mean.bigwig
Data processing Reads in files S0_L001_R1_001 and S0_L001_R2_001 were demultiplexed using Barcode Splitter (Galaxy Version 1.0.1). The barcode sequences used for this are indicated in the sample description. Number of allowed mismatches: 0; Number of allowed barcodes nucleotide deletions: 0.
Reads were filtered for quality and poly-A tails added during library preparation using DNA SMARTTM ChIP-Seq Kit (Takara Bio, 634865) were removed using RINSEQ (Galaxy Version 0.20.4+galaxy1). Minimum mean score threshold to conserve sequences: 15; Maximal N percentage threshold to conserve sequences 2; Minimum length of poly-A/T to trim at the 5'-end: 8; Trim sequence by quality score from the 3'-end -> Quality score threshold to trim positions: 20 -> Type of quality score calculation to use: Minimum -> Rule to use to compare quality score to calculated value: Less than -> Size of the sliding window used to calculated quality score by type: 1 -> Step size used to move the sliding window: 1.
Adapter sequences were removed using Trim Galore! (Galaxy Version 0.6.7+galaxy0). Adapter automatic detection and default settings were used.
Paired reads were interleaved using seqtk_mergepe (Galaxy Version 1.3.1) using default parameters.
Processed and interleaved reads were aligned to sacCer3 reference genome using Bowtie2 (Galaxy Version 2.4.2+galaxy0) and default settings.
Reads from aligned IP samples were normalised to those from aligned input samples using bamCompare (Galaxy Version 3.3.2.0.0). Method to use for scaling the largest sample to the smallest: read count; How to compare the two files -> Compute the ratio of the number of reads -> Pseudocount: 10 10.
Rad51-ChIP signal in PGAL1-RAD55 srs2Δ rad54Δ mutants was compared to PGAL1-RAD55 controls and in induced (GAL) NK1325 cells to uninduced (RAF) NK1325 cells using bigwigCompare (Galaxy Version 3.3.2.0.0) by computing the ratio signals using default settings. The average signal ratio for the two biological repeats was computed using bigwigCompare (Galaxy Version 3.3.2.0.0) -> compute the mean of the signal in the two files.
Assembly: reference sequence sacCer3
Supplementary files format and content: format: bigwig; content: Rad51 ChIP-seq signal comparison between mutant (treated) and control
 
Submission date Mar 15, 2023
Last update date Mar 17, 2023
Contact name Tadas Andriuskevicius
Organization name The University of Edinburgh
Department Institute of Cell Biology, School of Biological Sciences
Street address Alexander Crum Brown Road
City Edinburgh
ZIP/Postal code EH9 3FF
Country United Kingdom
 
Platform ID GPL22715
Series (1)
GSE227383 The inability to disassemble Rad51 nucleoprotein filaments leads to aberrant mitosis and cell death
Relations
BioSample SAMN33768371
SRA SRX19680252

Supplementary data files not provided
SRA Run SelectorHelp
Raw data are available in SRA
Processed data are available on Series record

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap