NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Sample GSM239238 Query DataSets for GSM239238
Status Public on Oct 24, 2007
Title Strength trained subject 7
Sample type RNA
 
Channel 1
Source name Human vastus lateralis, rested, strength trained
Organism Homo sapiens
Characteristics Biopsy of vastua lateralis of a rested athlete, with dietary control. Chronic resistance/strength training
Extracted molecule polyA RNA
Extraction protocol Total RNA was extracted from 20-30mg of muscle. Briefly, samples were homogenized in 1 ml of Trizol reagent (Invitrogen Life Technologies, Australia), and incubated at room temperature for 5 min. After addition of chloroform (200 µl), samples were incubated for 3 min at room temperature, centrifuged for 15 min (12 000 g, 4C) and the aqueous phase, containing the RNA, was precipitated with an equal volume of 100% ethanol. Total RNA was further purified through a Qiagen RNeasy Micro-column (Qiagen, Germany) according to manufacturer’s protocol. RNA was resuspended in 10µL RNase-free water.
Samples were amplified using the MessageAmp™ aRNA Kit (Ambion; Austin, Texas, USA) according to the manufactures instructions. Briefly, 0.5µg of total RNA was reverse transcribed to form first strand of cDNA, followed immediately by the formation of the second strand of cDNA, which is then purified. A 12 h in vitro transcription reaction was used to synthesize amplified RNA (aRNA), which was then purified and resuspended in 100µL of RNAse free water. aRNA was then ethanol precipitated by storing overnight at -20C in two volumes of 100% ethanol and 0.1 volume of 3M sodium acetate. aRNA was subsequently centrifuged at 12 000 g for 40 min at 4C, the pellet washed twice with 70% ethanol, then the aRNA resuspended in RNAse-free water to a final concentration of ~5mg/ml.
Label Cy5
Label protocol RNA were prepared for labelling using the Superscript™ III indirect labelling system (Invitrogen Life Technologies, Australia) where the aRNA was mixed with 1µl spike RNA, 2µl anchored oligo (dT)20 primer (2.5mg/ml) in a total volume of 18 µL and incubated for 5 min at 70 oC. Next, 6 µl of 5X first strand buffer, 1.5 µL 0.1M dithiothreitol (DTT), 1.5µL of dNTP mix with amino-modified nucleotides, 1µL RNAseOUT ™ (40U/µL) and 2µl of Superscript™ III reverse transcriptase (400U/µL) were incubated for 2 h at 46oC. The aRNA template then removed by hydrolysis with 1N NaOH at 70oC for 10 min and neutralized with 0.3 N acetic acid.
The cDNA was purified using Qiagen PCR purification columns (Qiagen,Germany), according to the manufacturer’s instructions. Sample cDNAs were labelled with Cy5 (CyDye Post-labeling reactive Dye Pack Amersham Biosciences #RPN 5661) on the column for 1 hr in the dark. Samples were washed with PE buffer, eluted with 80µl of H2O. This eluate is mixed with 400µl of PB buffer.
 
Channel 2
Source name Universal human RNA
Organism Homo sapiens
Characteristics Stratagene (Lot#0240515)
Extracted molecule polyA RNA
Extraction protocol Purchase in purified form in solution. This RNA was amplified using the MessageAmp™ aRNA Kit (Ambion; Austin, Texas, USA) according to the manufactures instructions. Briefly, 0.5µg of total RNA was reverse transcribed to form first strand of cDNA, followed immediately by the formation of the second strand of cDNA, which is then purified. A 12 h in vitro transcription reaction was used to synthesize amplified RNA (aRNA), which was then purified and resuspended in 100µL of RNAse free water. aRNA was then ethanol precipitated by storing overnight at -20C in two volumes of 100% ethanol and 0.1 volume of 3M sodium acetate. aRNA was subsequently centrifuged at 12 000 g for 40 min at 4C, the pellet washed twice with 70% ethanol, then the aRNA resuspended in RNAse-free water to a final concentration of ~5mg/ml.
Label Cy3
Label protocol Universal RNA was prepared for labelling using the Superscript™ III indirect labelling system (Invitrogen Life Technologies, Australia) where the aRNA was mixed with 1µl spike RNA, 2µl anchored oligo (dT)20 primer (2.5mg/ml) in a total volume of 18 µL and incubated for 5 min at 70 oC. Next, 6 µl of 5X first strand buffer, 1.5 µL 0.1M dithiothreitol (DTT), 1.5µL of dNTP mix with amino-modified nucleotides, 1µL RNAseOUT ™ (40U/µL) and 2µl of Superscript™ III reverse transcriptase (400U/µL) were incubated for 2 h at 46oC. The aRNA template then removed by hydrolysis with 1N NaOH at 70oC for 10 min and neutralized with 0.3 N acetic acid.
The cDNA was purified using Qiagen PCR purification columns (Qiagen,Germany), according to the manufacturer’s instructions. Sample cDNAs were labelled with Cy3 (CyDye Post-labeling reactive Dye Pack Amersham Biosciences #RPN 5661) on the column for 1 hr in the dark. Samples were washed with PE buffer, eluted with 80µl of H2O. This eluate is mixed with 400µl of PB buffer.
 
 
Hybridization protocol Both labelled sample and reference RNA were added to a new column, Cy3 (reference) then Cy5 (sample). This column was washed with PE buffer, and the pooled DNA eluted with 60µL H2O. The solution was dried in a heated vacuum, then the pellet resuspended and mixed in 16.2 µL of H2O, 30 µL of fresh 2x Hybridization buffer (500µL formamide, 500 µL 10 X standard saline citrate [SSC] and 20µL of 10% sodium dodecyl sulphate [SDS]), 5 µL of Cot1 DNA (Invitrogen), 3.8 µL PolyA (10mg/mL; Sigma) and 5 µL Salmon Sperm DNA (10mg/mL; Invitrogen). The samples were heated to 100oC for 2min, and cooled to room temperature, before the 60µL of solution were applied to the glass micro-array slide and cover slip via capillary action.
Scan protocol The micro-array slides were scanned using a Molecular Dynamics GenePix 4000B UV laser micro-array scanner (Amersham Pharmacia Biotech, Piscataway, NJ) interfaced with a personal computer utilising GenePix v 5.2 (Amersham Pharmacia Biotech, Piscataway, NJ)
Description No additional information required
Data processing Data were imported into Gene Spring (Silicon Genetics, USA) version 7.1 and unless otherwise indicated statistical analysis was performed using default settings in this software. Per chip-intensity-dependent normalization (LOWESS) was carried out for each array and a group of 5962 genes were identified that satisfied the criteria of a mean signal intensity of at least 150 in at least 50% of the hybridizations. Parametric analysis of variance (Welsh ANOVA) was performed on log-transformed ratios of the normalized data for these 5962 genes with Benjamini–Hochberg false discovery rate correction at P  0.05, to identify differentially expressed genes across three populations of athletes.
 
Submission date Oct 23, 2007
Last update date Aug 14, 2011
Contact name Nigel Keith Stepto
E-mail(s) nigel.stepto@med.monash.edu.au
Organization name Monash University
Department Physiology
Lab Exercise Physiology
Street address Wellington Road
City Clayton
State/province VIC
ZIP/Postal code 3800
Country Australia
 
Platform ID GPL6042
Series (1)
GSE9405 Differential gene expression in resting human skeletal muscle of sedentary and highly-trained individuals.

Data table header descriptions
ID_REF
VALUE M- value (same as M)
M M -value (log2 [fluorescences of test (muscle RNA) /fluorescence of reference (Human Univeral RNA) signal)]
A A-value (log2 [(fluorescence of test RNA X fluorescence of reference RNA)/2])
CH1_SIG_MEAN Mean fluorescence of test RNA (635nm; muscle RNA)
CH1_BKD Background fluorescence of test RNA
CH2_SIG_MEAN Mean fluorescence of reference RNA (532 nm; Human Univeral RNA)
CH2_BKD Background fluorescence of reference RNA

Data table
ID_REF VALUE M A CH1_SIG_MEAN CH1_BKD CH2_SIG_MEAN CH2_BKD
ID1 0.898935 0.898935 7.946144 143 62 555 299
ID2 -3.572560 -3.572560 9.161295 106 60 2910 301
ID3 0.348282 0.348282 7.826946 123 61 552 265
ID4 -1.828001 -1.828001 7.280966 81 61 742 279
ID5 -2.743238 -2.743238 7.234075 74 60 946 320
ID6 -0.222626 -0.222626 10.149884 379 59 1991 307
ID7 -0.507830 -0.507830 8.643035 147 63 983 347
ID8 0.002458 0.002458 6.950736 96 66 573 355
ID9 -2.537259 -2.537259 11.567921 541 67 9453 355
ID10 -1.053503 -1.053503 9.001830 162 66 1355 372
ID11 4.041002 4.041002 12.047775 7171 68 1688 370
ID12 -0.202300 -0.202300 7.534426 106 64 660 366
ID13 0.225344 0.225344 8.908873 203 66 964 374
ID14 0.477223 0.477223 8.800347 202 66 904 404
ID15 1.080272 1.080272 11.720518 1922 66 3207 362
ID16 -1.073004 -1.073004 9.722647 237 66 2013 360
ID17 -0.476489 -0.476489 7.282272 98 66 673 383
ID18 -0.079259 -0.079259 7.666315 111 63 634 332
ID19 -0.591842 -0.591842 10.181163 349 62 2269 326
ID20 -0.411219 -0.411219 8.735614 157 62 946 293

Total number of rows: 16416

Table truncated, full table size 809 Kbytes.




Supplementary file Size Download File type/resource
GSM239238.gpr.gz 1.7 Mb (ftp)(http) GPR
Processed data included within Sample table

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap