NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Sample GSM3672194 Query DataSets for GSM3672194
Status Public on Apr 02, 2020
Title Blastocysts_10_months_rep2
Sample type genomic
 
Channel 1
Source name Blastocysts
Organism Bos taurus
Characteristics sample type: IVF with sperm from a 10 months old bull
Extracted molecule genomic DNA
Extraction protocol Total RNA and gDNA were extracted using the AllPrep DNA/RNA Micro Kit (Qiagen)
The methodology have been thoroughly describef in (Saadi et al., 2014). Briefly, 10ng of DNA sample and spike-in control were cut in ≈160bp fragment using MSEI restriction enzyme. MseLig 12 and MseLig 21 adapters were added to the fragmented gDNA sites. Sample were the digested using methyl sensitive restriction enzyme HpaII, HinP1I and AciI. Only unmethylated fragment have been targeted by those enzyme, leaving only one adapter on the cleaved fragment. Efficiency of the digestion was confirmed by analyzing the spike-in control added prior to the DNA fragmentation step. For the step, qPCR was performed by preparing a separate mixes containing forward and reverse primer targeting HpaII, HinP1I and AciI site. Undigested spike-in (1/1000 dilution) was used as a positive control and non-template controls were also added as negatives control. The amplification plot and the dissociation curve were evaluated for each primer set separately. The DNA fragmentation was considered successful when the threshold cycle (ct) was greater than 5 when compared to the undigested control.Fragment selection by ligation-mediated PCR After cleavage by methyl sensitive enzyme, the gDNA was purified by ethanol precipitation and dissolve in nuclease free water. Selective amplification of methylated fragments was performed using two rounds of ligation-mediated PCR (LM-PCR). The PCR products were resolved on 0.8% agarose gel to assess the quality. Then the previously added linker were removed.
Label Cy3
Label protocol For each sample, 2 μg of DNA was labeled using the Universal Linkage System (ULS) labeling kit (Kreatech Biotechnology) according to the manufacturer’s instructions with minor modifications: 1 μL of Cy-ULS dye was added per 1 μg of genomic DNA adjusted with 10× labeling buffer. The labelling mixture was then held for 30 min at 85°C in a thermocycler, followed by 3 min on ice. Non-reacted ULS-Cy3/5 was removed by purification using a QIAquick PCR Purification Kit and samples were eluted in 23.5 μL nuclease-free water. A 1.5 μL aliquot was used to determine DNA concentration and dye incorporation using the ND- 1000 NanoDrop.
 
Channel 2
Source name Blastocysts
Organism Bos taurus
Characteristics sample type: IVF with sperm from a 16 months old bull
Extracted molecule genomic DNA
Extraction protocol Total RNA and gDNA were extracted using the AllPrep DNA/RNA Micro Kit (Qiagen)
The methodology have been thoroughly describef in (Saadi et al., 2014). Briefly, 10ng of DNA sample and spike-in control were cut in ≈160bp fragment using MSEI restriction enzyme. MseLig 12 and MseLig 21 adapters were added to the fragmented gDNA sites. Sample were the digested using methyl sensitive restriction enzyme HpaII, HinP1I and AciI. Only unmethylated fragment have been targeted by those enzyme, leaving only one adapter on the cleaved fragment. Efficiency of the digestion was confirmed by analyzing the spike-in control added prior to the DNA fragmentation step. For the step, qPCR was performed by preparing a separate mixes containing forward and reverse primer targeting HpaII, HinP1I and AciI site. Undigested spike-in (1/1000 dilution) was used as a positive control and non-template controls were also added as negatives control. The amplification plot and the dissociation curve were evaluated for each primer set separately. The DNA fragmentation was considered successful when the threshold cycle (ct) was greater than 5 when compared to the undigested control.Fragment selection by ligation-mediated PCR After cleavage by methyl sensitive enzyme, the gDNA was purified by ethanol precipitation and dissolve in nuclease free water. Selective amplification of methylated fragments was performed using two rounds of ligation-mediated PCR (LM-PCR). The PCR products were resolved on 0.8% agarose gel to assess the quality. Then the previously added linker were removed.
Label Cy5
Label protocol For each sample, 2 μg of DNA was labeled using the Universal Linkage System (ULS) labeling kit (Kreatech Biotechnology) according to the manufacturer’s instructions with minor modifications: 1 μL of Cy-ULS dye was added per 1 μg of genomic DNA adjusted with 10× labeling buffer. The labelling mixture was then held for 30 min at 85°C in a thermocycler, followed by 3 min on ice. Non-reacted ULS-Cy3/5 was removed by purification using a QIAquick PCR Purification Kit and samples were eluted in 23.5 μL nuclease-free water. A 1.5 μL aliquot was used to determine DNA concentration and dye incorporation using the ND- 1000 NanoDrop.
 
 
Hybridization protocol Hybridizations were performed according to the microarray manufacturer’s instructions (Agilent Technologies). Briefly, 1.4 μg of labeled sample (in 40 μL) was mixed with 158 μL of hybridization master mix containing 25 μL of Bovine Hybloc competitor DNA (1 mg/ml) , Applied Genetics Laboratories), 2.6 μL of Agilent 100x Blocking Agent and 130 μL of Agilent 2× HI-RPM Hybridization Buffer (Agilent Technologies). Samples were held at 95°C for 3 min and at 37°C for 30 min followed by addition of 65 μL of Agilent-CGHBlock (final volume 260 μL). The samples were loaded onto the microarray and hybridization was carried out in a hybridization oven (Shel Lab) for 40 h at 65°C and 20 rpm. Washing was carried out according to the microarray manufacturer’s instructions
Scan protocol Scan on a PowerScanner (Tecan) at 2um using the autogain function. Images were quantified using ArrayPro version 6.3 (MediaCybernetics)
Description Biological replicates 2 of 4
Data processing The array data analysis methods and downstream analysis pipelines are described in detail in (Saadi et al., 2014). Briefly, after Loess normalization, quantile inter-array scale normalization was performed and fitted to a linear model and thus, Bayesian statistics of differential expression were obtained. Thus, differentially methylated probes were identified using linear models for microarray data (LIMMA).
 
Submission date Mar 15, 2019
Last update date Apr 03, 2020
Contact name Marc-André Sirard
E-mail(s) Marc-Andre.Sirard@fsaa.ulaval.ca
Organization name Université Laval
Department Sciences Animales
Street address Offfice 2732, 2440 Hochelaga Blvd.
City Québec City
State/province Quebec
ZIP/Postal code G1V 0A6
Country Canada
 
Platform ID GPL18384
Series (2)
GSE128353 DNA methylation analysis of blastocyst according to peripubertal age of bull (10 vs 16 months)
GSE128629 The age of the bull influences the transcriptome and epigenome of the blastocysts

Data table header descriptions
ID_REF
VALUE Log2 normalized signal intensities (R/G)

Data table
ID_REF VALUE
EDMA_DIG_01_00252 -0.630598598
EDMA_DIG_01_00253 -0.919767322
EDMA_DIG_01_00525 0.043749131
EDMA_DIG_01_00526 0.625391478
EDMA_DIG_01_00772 0.285026408
EDMA_DIG_01_00773 -0.58695612
EDMA_DIG_01_00948 -0.358876332
EDMA_DIG_01_00949 -0.245743739
EDMA_DIG_01_01009 -0.277089408
EDMA_DIG_01_01010 -0.294091496
EDMA_DIG_01_01144 -0.372639463
EDMA_DIG_01_01145 -0.236524565
EDMA_DIG_01_01155 -0.188338806
EDMA_DIG_01_01156 -0.657123751
EDMA_DIG_01_01221 0.227496336
EDMA_DIG_01_01222 -0.292911108
EDMA_DIG_01_01349 0.108715467
EDMA_DIG_01_01350 0.354772039
EDMA_DIG_01_01391 0.074027511
EDMA_DIG_01_01392 0.355447251

Total number of rows: 414534

Table truncated, full table size 12318 Kbytes.




Supplementary file Size Download File type/resource
GSM3672194_111-slide2.txt.gz 23.1 Mb (ftp)(http) TXT
Processed data included within Sample table

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap