NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Sample GSM998010 Query DataSets for GSM998010
Status Public on Apr 01, 2018
Title CTC_4042_20CTC
Sample type genomic
 
Channel 1
Source name Circulating tumor cells Isolated from peripheral blood of metastatic breast cancer patient
Organism Homo sapiens
Characteristics diagnosis: Breast cancer
tumor stage: Metastatic
gender: Female
tissue: Peripheral Blood
cell type: Circulating Tumor Cells
Treatment protocol Array CGH experiments of Circulating Tumor, Primary Tumor, or cell line genomic DNA as test samples and normal human genomic DNA as reference sample.
Extracted molecule genomic DNA
Extraction protocol Magnetic beads coated with EpCAM mAb are used to enrich for tumor cells and then subjected to FACS analysis using differentially labeled mAbs to distinguish tumor cells (EpCAM+) from leukocytes (CD45+) during sorting. Using this protocol, we isolated small pools of highly purified CTCs from breast cancer patients. DNA from Tumor cells sorted in 10µL of TE was amplified using the GenomePlex® Single Cell Whole Genome Amplification Kit (Sigma-Aldrich) according to manufacturer’s protocol. The approach was evaluated using breast tumor cell model systems, BT474 and MCF7, and CTCs metastatic breast cancer (MBC) patients. Microdissection and DNA extraction of archival formalin-fixed paraffin-embedded (FFPE) primary tumor were done as previously described in Waldman FM, DeVries S, Chew KL, Moore DH, 2nd, Kerlikowske K, Ljung BM. Chromosomal alterations in ductal carcinomas in situ and their in situ recurrences. J Natl Cancer Inst 2000;92(4):313-20.
Label Cy3
Label protocol BioPrime Array CGH Labeling System (Invitrogen) was used to enzymatically label approximately 600ng of test or reference DNA with Cyanine 3-dCTP or Cyanine 5-dCTP (Amersham), respectively.Briefly, DNA suspended in 11µL of water and 10µL of random prime mix was heated for 10mins at 100°C and snap cooled on ice. 2.5uL of 10x-dNTP mix (8µL of 100mM dATP, 8µL of 100mM dGTP, 8µL of 100mM dTTP, 4µL of 100mM dCTP, 2µL 1M Tris, 0.4µL of 0.5M EDTA, and water), 1µL of Cy3 or Cy5 labeled dCTP( 1mM) and 0.6µL Exo-Klenow (40 U/µL) were added to the denatured DNA and incubated for 12 -20 hours at 37°C. Unincorporated nucleotides were removed using a Sephadex G-50 spin-columns.
 
Channel 2
Source name Promega reference Male genomic DNA
Organism Homo sapiens
Characteristics reference: Promega Human Genomic DNA cat#G147A
Treatment protocol Array CGH experiments of Circulating Tumor, Primary Tumor, or cell line genomic DNA as test samples and normal human genomic DNA as reference sample.
Extracted molecule genomic DNA
Extraction protocol Magnetic beads coated with EpCAM mAb are used to enrich for tumor cells and then subjected to FACS analysis using differentially labeled mAbs to distinguish tumor cells (EpCAM+) from leukocytes (CD45+) during sorting. Using this protocol, we isolated small pools of highly purified CTCs from breast cancer patients. DNA from Tumor cells sorted in 10µL of TE was amplified using the GenomePlex® Single Cell Whole Genome Amplification Kit (Sigma-Aldrich) according to manufacturer’s protocol. The approach was evaluated using breast tumor cell model systems, BT474 and MCF7, and CTCs metastatic breast cancer (MBC) patients. Microdissection and DNA extraction of archival formalin-fixed paraffin-embedded (FFPE) primary tumor were done as previously described in Waldman FM, DeVries S, Chew KL, Moore DH, 2nd, Kerlikowske K, Ljung BM. Chromosomal alterations in ductal carcinomas in situ and their in situ recurrences. J Natl Cancer Inst 2000;92(4):313-20.
Label Cy5
Label protocol BioPrime Array CGH Labeling System (Invitrogen) was used to enzymatically label approximately 600ng of test or reference DNA with Cyanine 3-dCTP or Cyanine 5-dCTP (Amersham), respectively.Briefly, DNA suspended in 11µL of water and 10µL of random prime mix was heated for 10mins at 100°C and snap cooled on ice. 2.5uL of 10x-dNTP mix (8µL of 100mM dATP, 8µL of 100mM dGTP, 8µL of 100mM dTTP, 4µL of 100mM dCTP, 2µL 1M Tris, 0.4µL of 0.5M EDTA, and water), 1µL of Cy3 or Cy5 labeled dCTP( 1mM) and 0.6µL Exo-Klenow (40 U/µL) were added to the denatured DNA and incubated for 12 -20 hours at 37°C. Unincorporated nucleotides were removed using a Sephadex G-50 spin-columns.
 
 
Hybridization protocol We combined and precipitated 30 µL Cy3 labeled test DNA, 30 µL Cy5 labeled reference DNA and 100 µg human Cot-1 DNA by adding 0.1 volumes of 3 M sodium acetate (pH 5.2) and 2.5 volumes of ice-cold ethanol. We collected the precipitate by centrifugation at 14000 rpm for 45 minutes at 4°C. We the final hybridization mixture containing 7ul dH20, 14µL 20% SDS, and 49 µL or Master Mix (5 mL ultra pure formamide from Invitrogen, 1g 500000MW Dextran Sulfate, 1mL 20xSSC, 1mL H20). We denatured the hybridization mixture at 73°C for 15 min and then incubated the samples at 37°C for 2hours to allow the Cot 1 DNA to anneal to repetitive DNA sequeces on both the sample and reference DNA. We exposed our printed arrays to 260000uJoules of UV using StrataLinker and applied a rubber cement ring around each array to form a well. After air drying the rubber cement we added our combined sample/reference hybridization solution onto the array. We placed a silicone gasket around the edge of the wells and laid a clean glass microscope slide on top of the gasket. We clamped the assembly together using binder clips to create an air tight environment. The arrays were incubated or 48-68 hours at 37°C on a slowly rocking table (1rpm). After disassembling the hybridization chamber, we rinsed off the excess hybridization fluid with PN buffer (PN: 0.1 M sodium phosphate, 0.1% nonidet P40, pH 8), then washed the arrays once in a solution containing 50% formamide in 2xSSC for 15 min. at 45°C and finally in PN buffer at room temperature for 15 min. We removed the ring of rubber cement, drained excess liquid from the arrays, mounted them in a solution containing 90% glycerol, 10% PBS and 1 mM DAPI, and sealed them with a cover slip.
Scan protocol Arrays were imaged using a custom built CCD array imaging system and analyzed using the UCSF Spot Program to calculate Cy3/Cy5 ratios.
Description Sample name: 4042_20CTC
Matched TLDA sample name: CTC.4042.20CTC.1.T2.D1
Matched TLDA sample Accession Number: GSM998257
Data processing The aCGH data from our cohort were processed by the custom program SPROC in order to automatically filter out data points with low DAPI intensity, low correlation between Cy3 and Cy5 within each spot, and low reference/DAPI signal intensity. Clones whose ratios were derived from only one of the triplicate spots or with a triplicate log2 SD >0.2 were set as missing. The tumor data was filtered for unmapped clones and poorly performing ones identified as those missing in more than 50% of the tumor samples. A second set of triplicate spots for 38 of these clones were averaged resulting in a total of 1965 clones remaining after processing. The data were mapped to the May 2004 freeze of the human DNA sequence.
 
Submission date Sep 05, 2012
Last update date Apr 01, 2018
Contact name Mark Magbanua
Organization name UCSF/Helen Diller Familiy Comprehensive Cancer Center
Department HemOnc
Lab Park
Street address 1450 3rd Street, PO Box 589001
City San Francisco
State/province CA
ZIP/Postal code 94158-9001
Country USA
 
Platform ID GPL6359
Series (1)
GSE40622 Expanded Genomic Profiling of Circulating Tumor Cells in Metastatic Breast Cancer Patients to Assess Biomarker Status and Biology Over Time (CALGB 40502 and CALGB 40503, Alliance).

Data table header descriptions
ID_REF
VALUE log2 test/reference ratios

Data table
ID_REF VALUE
HA3.2P2_P36
HA3.2P1_D28 -0.435382
HA3.2P1_H36 -0.789925
HA3.2P1_H28 -0.508238
HA3.2P1_L28
HA3.2P1_D25 -0.025044
HA3.2P1_P28 -0.137695
HA3.2P1_B16 -0.200829
HA3.2P1_J16 -0.191154
HA3.2P1_A30 -0.117866
HA3.2P1_N16 -0.330308
HA3.2P1_R16 -0.105837
HA3.2P2_H46 0.121382
HA3.2P1_A8 -0.271864
HA3.2P1_H25 -0.295184
HA3.2P1_Z16 0.150721
HA3.2P1_V16 0.239214
HA3.2P1_B20 -0.101164
HA3.2P1_AA48 0.183172
HA3.2P1_E30 -0.020366

Total number of rows: 1956

Table truncated, full table size 36 Kbytes.




Supplementary file Size Download File type/resource
GSM998010_2012_3_28_4042_20CTC_1_T2_D2_SPOT.txt.gz 696.7 Kb (ftp)(http) TXT
Processed data included within Sample table

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap