 |
 |
GEO help: Mouse over screen elements for information. |
|
| Status |
Public on Apr 30, 2019 |
| Title |
ChIP-seq_HAP1_WT_Input_20_r1 |
| Sample type |
SRA |
| |
|
| Source name |
HAP1 cell line
|
| Organism |
Homo sapiens |
| Characteristics |
library: ChIP-seq
cell line: HAP1
replicate: 1
ip: Input
clone: C631
|
| Growth protocol |
HAP1 WT and knock-out cells were cultured in Iscove’s Modified Dulbecco’s Medium (IMDM, Thermo Fisher Scientific, 21980-032) supplemented with 10% heat inactivated Fetal Bovine Serum (FBS, Thermo Fisher Scientific, 10500) and 1% Pen Strep (100 units/ml Penicillin, 100 µg/ml Streptomycin, Thermo Fisher Scientific, 15140-122). A549 cells were cultured in F-12K Nut Mix (Thermo Fisher Scientific, 21127-022) supplemented with 10% FBS and 1% Pen Strep.
|
| Extracted molecule |
genomic DNA |
| Extraction protocol |
ChIPmentation was carried out as described (Schmidl et al, Nature Methods 2015). Cells were washed once with PBS and fixed with 1% paraformaldehyde in up to 1ml PBS for 10 min at room temperature. Glycine was added to stop the reaction. Cells were collected at 500 g for 10min at 4 C, washed twice with cold PBS supplemented with 1 mM phenylmethyl sulfonyl fluoride (PMSF). The pellet was lysed in sonication buffer (10mM Tris-HCl pH 8.0, 1mM EDTA pH 8.0, 0.25% SDS, 1uL protease inhibitors (Sigma) and 1 mM PMSF) and sonicated with a Covaris S220 sonicator to a range of 200-700 bp. Lysates were centrifuged at full speed for 5min at 4 C, and the supernatant transferred to a new tube. The lysate was then brought to RIPA buffer conditions (final concentration: 10mM Tris-HCl pH 8.0, 1mM EDTA pH 8.0, 140mM NaCl, 1% Triton X-100, 0.1% SDS, 0.1% sodium deoxycholate, 1uL protease inhibitors (Sigma) and 1 mMPMSF) to a volume of 200 ml per IP. For each immunoprecipitation, 10 ml magnetic Protein A (Life Technologies) were washed twice and resuspended in PBS supplemented with 0.1% BSA. The antibody was added and bound to the beads by rotating 2 h at 4 C. Used antibodies were H3K4me1 (0.5 mg per IP, Diagenode pAb-194-050), H3K27ac (1 mg per IP, Diagenode pAB-196-050) and H3K27me3 (1 mg per IP, Millipore 07-499). For control libraries, an IP with 2.5 mg of a nonspecific IgG rabbit antibody was used. Blocked antibody-conjugated beads were then placed on a magnet, supernatant was removed and the sonicated lysate was added to the beads followed by incubation for 3-4 h at 4 C on a rotator. Beads were washed subsequently with RIPA (twice), RIPA-500 (10mM Tris-HCl pH 8.0, 1mM EDTA pH 8.0, 500mM NaCl, 1% Triton X-100, 0.1% SDS and 0.1% DOC) (twice) and RIPA-LiCl (10mM Tris-HCl pH 8.0, 1mM EDTA pH 8.0, 250mM LiCl, 1% Triton X-100, 0.5% DOC and 0.5% NP40) (twice). Beads were washed once with cold Tris-Cl pH 8.0, to remove detergent, salts and EDTA. Beads were washed once more with cold Tris-Cl pH 8.0.
DNA was purified with SPRI AMPure XP beads (sample-to-beads ratio 1:2) or Qiagen MinElute columns. One microlitre of each library was amplified in a 10-ml qPCR reaction containing 0.15 mM primers, 1uL SYBR Green and 5 ml Kapa HiFi HotStart ReadyMix (Kapa Biosystems), to estimate the optimum number of enrichment cycles with the following programme: 72 oC for 5min, 98 oC for 30 s, 24 cycles of 98 oC for 10 s, 63 oC for 30 s and 72 oC for 30 s, and a final elongation at 72 oC for 1min. Kapa HiFi HotStart ReadyMix was incubated at 98 oC for 45 s before preparation of all PCR reactions (qPCR and final enrichment PCR). Final enrichment of the libraries was performed in a 50-ml reaction using 0.75 mM primers and 25 ml Kapa HiFi HotStart ReadyMix. Libraries were amplified for N+1 cycles, where N is equal to the rounded-up Cq value determined in the qPCR reaction. Enriched libraries were purified using SPRI AMPure XP beads at a beads-to-sample ratio of 1:1, followed by a size selection using AMPure XP beads to recover libraries with a fragment length of 200-400 bp. Library preparation was performed using custom Nextera primers as described for ATAC-seq. The libraries were sequenced by the Biomedical Sequencing Facility at CeMM using the Illumina HiSeq 4000 platform and the 50-bp single-end configuration.
|
| |
|
| Library strategy |
ChIP-Seq |
| Library source |
genomic |
| Library selection |
ChIP |
| Instrument model |
Illumina HiSeq 4000 |
| |
|
| Description |
ChIP-seq for Input_20 on HAP1 cell line, replicate 1
baf_complex.chipseq_peaks.raw_coverage.csv
|
| Data processing |
Base calls provided by the Illumina Realtime Analysis software were converted into BAM format using Illumina2bam and demultiplexed using BamIndexDecoder (https://github.com/wtsi-npg/illumina2bam)
Sequenced reads were trimmed for adaptor sequences
Reads were mapped to hg19 whole genome using bowtie2 v2.2.4 with the –very-sensitive parameter
Duplicate reads were marked and removed with picard tools version 1.118
Library quality was assessed with the phantomPeakQualtools scripts (Landt SG, Genome Research 2012).
Genome_build: hg19
Supplementary_files_format_and_content: bigWig files contain counts of reads per basepair
Supplementary_files_format_and_content: csv file contains read counts for each sample in each regulatory element
|
| |
|
| Submission date |
Dec 21, 2017 |
| Last update date |
May 07, 2019 |
| Contact name |
Christoph Bock |
| E-mail(s) |
cbock@cemm.oeaw.ac.at
|
| Organization name |
CeMM Research Center for Molecular Medicine of the Austrian Academy of Sciences
|
| Street address |
Lazarettgasse 14
|
| City |
Vienna |
| ZIP/Postal code |
1090 |
| Country |
Austria |
| |
|
| Platform ID |
GPL20301 |
| Series (2) |
| GSE108387 |
Systematic functional characterization of BAF mutations yields novel intra-complex synthetic lethalities [ChIP-Seq] |
| GSE108390 |
Systematic functional characterization of BAF mutations yields novel intra-complex synthetic lethalities |
|
| Relations |
| BioSample |
SAMN08224238 |
| SRA |
SRX3503214 |
| Supplementary data files not provided |
SRA Run Selector |
| Raw data are available in SRA |
| Processed data are available on Series record |
|
|
|
|
 |
